Nps errpr id 440011/20/2022 O For the 64 NIC's user-ID= root and password= root. Log on to the NIC using the proper user-ID and password. If you do get the logon request, refer to the Ethernet User's guide for the user-ID and password. If not, reset the NIC per the printers Ethernet User's Guide. Perform the following steps only after you have successfully pinged the NIC using the above steps.Īt the command prompt, type the following: If communication failures still occur, check to see if backchannel is set on port 5001. Telnet back into the printer, and verify port 5001 destination is dipdsprn. The printer should drop the telnet connection.Ĭycle the printer power off and then back on. The Good printer has prn next to dipdsprn.įor the Bad printer, type store pserver from default and press the Enter key. The Good printer says dipdsprn for port 5001.ī. The Bad printer says d4prn for port 5001.ī. Type list pserver, and press the Enter key.Ī. Perform the following steps to reset the NIC card: During testing of the latest code, we found that under certain conditions IPDS printing was disabled, although we were able to ping the printer. Ĭustomer is able to ping the printer however, customer cannot print to it from an IPDS Host.ĭue to the inclusion of several enhancements in the latest microcode update, it is possible for the Ethernet card to require a reset. If further assistance is needed with these instructions, you should contact InfoPrint Solutions Company Customer Support at. Note: The following instructions from the InfoPrint Solutions Company (formerly IBM Printing Systems) are for resetting an IBM 6400 IPDS line matrix printer that is no longer printing using an *LAN IPDS device description.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |